0,00 € Shipping
0,00 € Total
Prices are tax excluded
“My engine turns over , but won´t start up!”
This unit re-synchronises in seconds the immobiliser codes of a BeCM with its Engine Management System (EMS).
No computer, no cable-software required...
This version is for a Range Rover P38 with a Petrol engine GEMS ECU.
Introducing the BeCM Sync Mate
The BeCM Sync Mate solves an increasingly common problem of P38 Range Rovers (95 to 2002) of being left stranded because the BeCM or body control unit, in some cases forgets the immobiliser code it needs to send to the engine management system for it to start the engine.
Previously when this happened, there used to be only two ways to get moving again:
The first was to call out a garage with a diagnostic tool to reset the system and then pay the mechanic a averyexpencive “call out” to fix the problem.
The second way is to fit a new “body Control Unit” which will cost arround €700 + programming and fitting.
But now there is a third way! The BeCM Sync Mate.
Within a minute your BeCM will be automatically resynchronised with the engine management system and you will be on your way.
To re-synchronise your BeCM, you simply plug the BeCM Sync Mate in and it resets the BeCM for you. No fuss, no palaver and more importantly, no costly call out fee just for two minutes work.
When it has finished working, it lets you know what it has done. With intelligent use of a high intensity flashing LED, the BeCM Sync Mate will inform the user that the BeCM: Is already synchronised, or it is has been re-synchronised. Finally it could also inform you that there has been a communication error – in which case it will then also tell you the cause of that error.
The quick, cost effective and easy solution
To resynchronize your BeCM to the engine management, just plug our tool into your OBDII
connector and observe the sequence displayed on the units high intensity multi color LED.
The BeCM Sync Mate is extensively tested and has hundreds of satisfied purchasers. As such we
guarantee it will synchronize the BeCM to the Engine Management.
If the problem was only the previously described loss of synchronisation problem the vehicle
It is however not guaranteed to fix any other problem that may cause a vehicle to not
What engine type do you have in your P38?
There are three versions of the BeCM Sync Mate and you need to be sure to order the right one
for your engine type.
This product is valid for Range Rover P38 (1995-2002) with a Petrol engine GEMS ECU .
No customer reviews for the moment.